GS1714 FRONT LOADING GLASS KILN SPECIFICATIONS INTERIOR DIMENSIONS: * 17" wide by 12" high by 14.5" deep * (43.2 cm wide by 30.5 cm high by 36.8 cm deep) * 1.74 cubic feet (.048 cubic meters) * Note: with hearth plate there is 10" from top of hearth to top of chamber EXTERIOR DIMENSIONS: * 19" wide by 19" high by 23" deep * (48 cm wide by 48 cm high by 58 cm deep) SHIPPING DIMENSIONS: * 44" wide by 40" high by 40" deep * (91 cm wide by 76 cm high by 91 cm deep) SHIP WEIGHT: 475 lbs, 215 KG MAX TEMP: 2350°F - 1287°C-CONE 10 200 to 240 VOLT OPERATION * Plugs into a standard 30 amp dryer outlet (14-30R Receptical) AMPS & WATTS * At 240 volts: 6000 watts, 25.0 amps * At 220 volts: 5042 watts, 22.9 amps * At 208 volts: 4507 watts, 21.7 amps * At 200 volts: 4167 watts, 20.9 amps FEATURES DYNA-GLOW ELEMENT HOLDERS * Provide easier maintenance and more efficient firing of the kiln * Helps prevent dusting * Elements won't fall out of roof * No pins DYNATROL PROGRAM CONTROL INCLUDED * 6 programs with 8 segments each (2 programs can be linked for a total of 16 segments). INDUSTRIAL THERMOCOUPLE ELEMENTS ON TOP, BOTTOM AND SIDES RESULTS IN TIGHT GRADIENT UNIFORMITY * A nine point temperature uniformity survey demonstrated better than +/- 7-1/2°F (a total variation of 15°F) from corner to corner in the chamber from 500°F to 2000°F. FAST HEAT-UP * Heats up to 2100°F in less than one hour at 240 volts * Heats up to 2100°F in less than 2-1/2 hours at 208 volts. COUNTERBALANCED VERTICAL DOOR * Lift easily with one hand. * Air-cooled handle stays cool to touch. SLOT IN DOOR * There is a 1-1/2" wide by 2-1/2" high slot in the bottom of the door. * You can work through the slot while opening and closing the door. Includes removable insulated plug with a handle. * The slot is approximately 3/4" above the hearth plate. BENCH MOUNTED ON HEAVY DUTY BASE * The case is constructed of welded heavy gauge steel. * The case is painted with a tough, baked-on epoxy powder coating. FOUR LIFTING HANDLES * Makes moving easy. * Two people can pick up kiln. CERAMIC HEARTH PLATE INCLUDED * Comes with 1/2" high ceramic standoffs. * Hearth is 16" wide by 13" deep. * Extra shelves are $40 each. COATED HARDENED FIREBRICK REDUCES DUSTING * We coat our firebrick with a proprietary reflective ceramic coating which penetrates, binds and hardens the surface of the entire interior of the kiln. FIREBRICK & BACK-UP MULTI-LAYERED INSULATION * 3" firebrick on top (for extra strength) * 2-1/2" on other surfaces. * Brick is backed up with 2" of mineral wool. * It only takes about 850 watts to maintain temperature at 2000°F. * Back up insulation keeps case relatively cool to touch. MULTI-VOLTAGE MAKES IT EASY TO HOOK UP * Furnace will operate on any single phase voltage from 200 volts to 240 volts, 50 Hz or 60 Hz. Truly a universal kiln/furnace. DOOR CUT OFF LIMIT SWITCH * Turns power off when door opens. ON/OFF TOGGLE SWITCH AND CONTROL FUSE POWER PLUG INCLUDED * 30 amp NEMA 14-30 four-prong plug with ground and neutral (typical dryer cord). Neutral is not used. ADVANCED FOAM-IN-PLACE PACKAGING * Packed in a protective skidded carton with advanced foam-in-place packaging for trouble-free common carrier shipment. NOTE: This kiln is not UL listed. |
|
| Angle Iron StandAngle Iron Stand for GS1714 |
|
|
| Vent-Sure Vent SystemVent-Sure Vent System |
|